condom production company

Established at 2008, as one of the first polyurethane condom production company, we can produce the thinnest condom in the world now, the thinnest lower to 0.01mm. and the best sell is the 0.02mm condom due to which cost more affordable to consumers. The latex condom’s best thickness lower to 0.03mm now, which also is the best skin feeling for consumers.

Every condoms is tested for small holes at the voltage of about 2.000 V by the testing line. For that purpose, the condom is pulled over a metal mandrel moving in such a way as to get into contact with a conductive latex rubber. An intact condom is an isolator; in this case, no electrical current will be measured. Otherwise, if there is a hole in the condom, the electronics of the testing machine will measure an electronic current, and the condom will be rejected. The good condoms are conveyed to a foiling machine. and the hole one will rejected. During the foiling process, the batch number and the expiry date are printed onto the foil at the same time. The lubricant is applied on the condom while pincers pull the condom between the upper and lower foil before the foils are sealed together.

Welcome inquiry us if you plan build own condom brand, we can offer you wide option of types and size, offer your distributors more choice. Email: [email protected]

• 
  detailsenquiry
  Custom condoms 003 with hyaluronic acid lubricants
• 
  detailsenquiry
  do condoms work in the shower?
• 
  detailsenquiry
  Barely there enhanced sensation condoms for more pleasure
• 
  detailsenquiry
  3in1 condoms multi-textured dotted, ribbed & contoured